What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
08.06.2025 23:54

The bolt then partially travels down the line to your home.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
2024–10–16 [ OO OLAOYE OYEBODE ]
[image of Common-mode choke]
A circuit breaker is similar, but is resettable.
Is it normal to hate my dog, but feel too guilty to get rid of him?
so, what happens?
(Dc diagram shown, AC is similar).
Barnstars:
One
a photo is worth a thousand words.
He then describes the function of a fuse.
All the ways Apple TV boxes do—and mostly don’t—track you - Ars Technica
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
These devices are installed between the “hot” and “neutral” and protective ground.
At one ohm, the resistor has a maximum of 1 watt power.
First Sentence:
Apple Is About to Upgrade Your Current AirPods with Some Neat New Abilities - Gear Patrol
One is “what exactly is in a ‘surge protector’ ? ”
eight
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Six Types Of Dinosaur Eggs Found In One Place - The Daily Galaxy
I post the exact comment here.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This Type of Fiber Could Have Weight Loss Benefits Similar to Ozempic - ScienceAlert
The other is “what does a “fuse” do?”
2024–10–14 [Omar Gharbi Omar Gharbi ]
Because the load is inductive, the current lags the voltage.(by a bit).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
There are two important concepts here.
A fuse is a non-resetable over current circuit protector.
This Genetic ‘Trick’ Helped the Black Death Linger for Centuries - Gizmodo
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
There are three different concepts here that are getting confused.
the problem then depends on "how fast does the fuse operate?".
This is 'the assistant's answer'
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
It seems Mohan does not understand the difference between a comment and an Answer.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This one hit behind the barn.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is where the MOV conducts again, and dissipated the energy.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Here is a simplified AC power diagram.
What is lightning?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
In schematic diagrams this is the symbol for a fuse:
The third is lightning and “how it gets conducted into a home.”
At least they know the answer if they wanted it.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
He then asserts :
2024–10–10[John johnson John Johnson ]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
These are simplified answers to the original question, and does not change anything I wrote above.
But… the neutral is now “floating” because of the 1 ohm resistance.
Edit 2024–10.
but I think this circuit , shows a few more pieces.
nine
[old diagram got deleted by accident]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
So, the voltage could go up to 500 volts, and the fuse will not open up.
This device then solves the entire problem.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
what exactly is a ‘surge’ protector?
but this device (an Inductor) … impedes the rapid changes in the current.
This is where this question deviates from being a 'generic' question, and becomes more specific.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
He then describes Rainy Season and Lightning.
It also is a device that limits the change in current flow.
But it can get overloaded, and no longer works.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Upvotes:
The MOV will conduct when the voltage exceeds 50% of line voltage.
Now when you have a certain ac resistance, then a current flows in a loop.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
An AC voltage/ current source, and an ac inductive load.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
For this case there are devices called Metal oxide varistors (MOV).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What does a fuse do?